产品详情
实轴型 Solid Shaft

实轴型 Solid Shaft

编号：AEV58I2/AOV58I2/AEV115I

规格：HTL/TTL

  • 电气参数
  • 机械参数
  • 资料下载
  • 认证证书
  • 配件资料
Advanced data for product
Nominal voltage
Specific value24 VDC
Limit values, min/max10/30 VDC
Nominal current, typically
Specific value40 mA
Conditionunloaded
Supply
SELV/PELVIEC 60364-4-41
In case of UL / CSA approvalaccording to NEC Class 2
Signal form  SIN/COS
Signal form, alternative  Square
Incremental signals, square
ChannelsK1+, K1-, K2+, K2-
Phase position, electrically90 °
Zero pulse, square
Channel (Channels)K0+, K0-
Number of revolutions1x
Incremental signals, SIN/COS  SIN± COS±, 1 Vss
Output frequency<= 500 kHz
Load current<= 20 mA
Zero pulse, SIN/COS
Channel (Channels)Ref+, Ref-
Impulses, square wave  1024
 2048
 4096
Impulses, SIN/COS  1024
 2048
 4096
Accuracy
Applicable resolution10 Bit, 11 Bit, 12 Bit
Safety-related+ 2 Bit interpolated
Functional+ 8 Bit interpolated
Output stages
Factory settingTTL / HTL
Output driver, TTL
Output levelRS-422, 5 VDC
Load current<= 50 mA
Load currentper Channel
Output frequency<= 100 kHz
Short-circuit proofyes
Output driver, HTL
Short-circuit proofyes
Output levelPush-Pull, supply voltage
Load current<= 50 mA
Load currentper Channel
Output frequency<= 100 kHz
Speed, electrically [1/min]  (f-Cutoff/Imp. Rev) * 60 1/min
Parameter/Function, changeable  Number of pulses
 Output stage (TTL/HTL)
Type of parametrization  Factory setting
Functional safety
SIL-StandardizationDIN EN 61508 / DIN EN 62061
SIL-StandardizationDIN EN 61800-5-2
SIL-LevelSIL2 / SIL CL 2
SIL-LevelSIL3 / SIL CL 3
PL-StandardizationDIN EN ISO 13849-1
Performance-Level (PL)PLe / Cat. 3
Performance-Level (PL)PLd / Cat. 3
Service life20 Years
PFH / PFH [D]5.34E-9 1/h (SIN/COS)
PFH / PFH [D]6.57E-9 1/h (TTL/HTL)
PFH / PFH [D]PFH: DIN EN 61508-4
PFH / PFH [D]PFH [D]: DIN EN ISO 13849-1
MTTFd622 a (TTL/HTL)
MTTFd1558 a (SIN/COS)
DCavg90 %
Maximum Speed, mechanically  <= 12000 1/min
Shaft load, axial/radial  <= 50 N, <= 100 N
Bearing life time  >= 3.9E+10 revolutions
Bearing life time - Parameter
Speed6000 1/min
Operating temperature60 °C
Shaft load, axial/radial= 60 %
Point of origin, shaft load  Mounting flange + 10 mm
Shaft type
Shaft diameter [mm]10
Shaft formingParallel key/Groove
Angular acceleration  <= 10E+4 rad/s²
Moment of inertia, typically  4.9E-6 kg m²
Start-up torque, 20 °C  3.4 Ncm
 3.6 Ncm (0 °C)
 7.8 Ncm (-20 °C)
 20 Ncm (-40 °C)
Mass, typically  0.3…0.5 kg
General environmental conditions
Vibration
Specific value<= 100 m/s²
Sine50…2000 Hz
Shock
Specific value<= 1000 m/s²
Half sine11 ms
Immunity to disturbance  DIN EN 61000-6-2
Transient emissions  DIN EN 61000-6-3
Working temperature
Standard-40…+90 °C
Storage temperature, dry  -40…+90 °C
Relative humidity  98 %, non condensing
Protection class
StandardIP65 shaft side
StandardIP67 housing side

实轴型 Solid Shaft

下载产品说明文档
上一篇: 通孔型 Hollow shaft下一篇:盲孔型 Blind Shaft

×