产品详情
重载防爆 Heavy duty ATEX

重载防爆 Heavy duty ATEX

编号：

ADV100M/AEV115M


规格：

ProfiNet + FS3 /Profibus + FS/其他接口（详询工程师）

  • 电气参数
  • 机械参数
  • 资料下载
  • 认证证书
  • 配件资料
Advanced data for product
Nominal voltage
Specific value24 VDC
Power consumption  Power class <= 3 W
 Power class <= 6 W
Device design
TypeSingle-/Multi-Turn
Housing - Material
Stainless steel 1.4305X12 Cr NiS 18 08 / 18 9
Maximum Speed, mechanically  Speed class <= 3000 1/min
 Speed class <= 6000 1/min
Shaft load, axial/radial  <= 40 N, <= 60 N
Bearing life time  >= 3.68E+10 revolutions
Bearing life time - Parameter
Speed3000 1/min
Operating temperature60 °C
Shaft load, axial/radial<= 20 N, <= 30 N
Point of origin, shaft load  at the shaft end
Shaft type
Shaft diameter [mm]10
General environmental conditions
Vibration  DIN EN 60068-2-6
Specific value<= 100 m/s²
Sine50…2000 Hz
Shock  DIN EN 60068-2-27
Specific value<= 1000 m/s²
Half sine6 ms
Immunity to disturbance  DIN EN 61000-6-2
Transient emissions  DIN EN 61000-6-3
Working temperature
Standard-40 °C <= Ta <= +40…+75 °C
Storage temperature, dry  -30…+80 °C
Relative humidity  95 %, non condensing
Protection class
StandardIP65
Optionalextended to IP67
Explosive atmospheres
Documentation available inGerman
Documentation available inEnglish
Relev. Ex Directive/Standards
Directive 2014/34/EU (ATEX)Intended use
EN IEC 60079-0General requirements
EN/IEC 60079-1Flameproof enclosures "d"
EN/IEC 60079-14Installation, erection
EN/IEC 60079-31Dust ignition protection “t”
DIN EN 60529Degrees of protection, IP code
Ex protection - Data, Gas
Device group /-categoryII 2G (Gb, Zone 1)
Ignition protection typedb (Flameproof enclosures)
GroupIIC (Hydrogen)
Temperature, surfaceT4 (<= 135 °C)
Temperature, surfaceT5 (<= 100 °C)
Temperature, surfaceT6 (<= 85 °C)
Special conditionsyes (X), observe Ex manual
Ex protection - Data, Dust
Device group /-categoryII 2D (Db, Zone 21)
Ignition protection typetb (Protection by enclosure)
GroupIIIC (conductive dust)
Temperature, surfaceT80°C
Temperature, surfaceT95°C
Temperature, surfaceT130°C
Special conditionsyes (X), observe Ex manual
Type examination certificates  IBExU 17 ATEX 1042 X
IECEx Certificate  IECEx IBE 21.0024 X

重载防爆 Heavy duty ATEX

下载产品说明文档
上一篇:无下一篇:安全防爆 Safety Atex

×