产品详情
实轴型 Solid Shaft

实轴型 Solid Shaft

编号：

CEV84M/CEV115M/CEV582M+Bearing


规格：

SSI/Profibus-DP/ProfiNet IO/其他接口（详询工程师）

  • 电气参数
  • 机械参数
  • 资料下载
  • 认证证书
  • 配件资料
Advanced data for product
Nominal voltage
Specific value24 VDC
Limit values, min/max11/27 VDC
Nominal current, typically
Specific value140 mA
Conditionunloaded
Integrated heating
EquipmentOption
Nominal voltage24 VDC ± 5 %
Nominal power48 W
Integrated water cooling
EquipmentOption
Device design
TypeSingle-/Multi-Turn
Total resolution  <= 31 Bit
Number of steps per revolution  <= 8192
Number of revolutions  <= 256000
Output capacity  <= 25 Bit
PROFIBUS - Interface
PROFIBUS-DP V0IEC 61158, IEC 61784
PNO Encoder-ProfileClass 1 and 2
SSI - Interface
EquipmentOptional interface
SSI-Clock inputOptocoupler
SSI-Data outputRS-422, 2-wire
SSI-Clock frequency80…1000 kHz
SSI-Mono time, typically18 µs
Incremental - Interface
EquipmentOptional interface
Incremental signals, squareK1± K2±
Impulses, square wave1024 or 2048
Output driver, TTLRS-422, 5 VDC
Transmission rate
Specific value9.6…12000 kbit/s
Cycle time  250 µs
Parameter/Function, changeable  Resolution
 Output code
 Limit switch
 External Preset inputs
 Adjustment - Parameter
 SSI-Parameter
 Counting direction
 Gear function
 Velocity parameter
Type of parametrization  programmable
Programming - Tool  Fieldbus-Device
External inputs
Presetelectronic adjustment
Logic level"0“ < +2V, "1“ = Supply
Maximum Speed, mechanically  <= 3600 1/min
Shaft load, axial/radial  <= 100 N, <= 150 N
Bearing life time  >= 2.8E+10 revolutions
Bearing life time - Parameter
Speed3000 1/min
Operating temperature60 °C
Shaft load, axial/radial<= 60 N, <= 90 N
Point of origin, shaft load  at the shaft end
Shaft type
Shaft diameter [mm]12
Shaft diameter [mm]14
Shaft diameter [mm]20
Angular acceleration  <= 10E+4 rad/s²
Mass, typically  4 kg
General environmental conditions 
Vibration
Specific value<= 245 m/s²
Sine50…2000 Hz
Immunity to disturbance  DIN EN 61000-6-2
Transient emissions  DIN EN 61000-6-3
Working temperature
Standard-20…+70 °C
Optional-40…+70 °C;
differing from itsee name plate
Storage temperature, dry  -40…+80 °C
Relative humidity  98 %, non condensing
Protection class
StandardIP65
NoteDouble protective housing
Optionalextended to IP67

实轴型 Solid Shaft

下载产品说明文档
上一篇:通孔型 Hollow shaft下一篇:无

×